IT-42 Output Transformer
Product Description
The IT-42 is an output isolation transformer accessory for the QSC CX302 amplifier, allowing it to drive two 25, 70V and 100 volt distributed lines in stereo or parallel or a single 140-or 200-volt line in bridged mono.
The IT-42 is pre wired for quick
and convenient mounting to the back of the CX302 amplifier
and requires no additional rack space.
- Fully isolated secondary
- Dual channel: 25V, 70V, or 100V lines
- Bridged mono: 140V or 200V line
- Up to 400 watts per channel or 800 watts in
bridged mono
- Frequency response: 75 Hz–12 kHz +0, -3 dB, loaded with 12.2 ohms (70V) or 25 ohms (100V) non-inductive load. (using 75 Hz filter on amplifier)
- Output regulation: < 1 dB at mid-band frequencies, no-load to full-load (3 dB for 25V loads)
- Weight 3.6 pounds (1.6 kg)
- Overall depth (amplifier + IT-42) 17.3 inches (440 mm)
- Harmonic distortion: less than 0.05%, 75 Hz, -3 dB less
than 0.5%, 150 Hz–12 kHz at 0 dB
IT-42
Spec Sheet (PDF)